October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fig 1: Knock Sensor (KS) Component View

Courtesy of GENERAL MOTORS CORP.

Install the knock sensor.
Tighten: Tighten the knock sensor to 25 N.m (18 lb. ft.).
Connect the knock sensor electrical connector.
Reinstall the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical.