LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> DeVille Protection Series >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

    Fig 1: MAP, IAC, ECT, TP Sensors Component View
    GM602335Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition OFF.
  2. Disconnect the MAP sensor electrical connector.
  3. Remove the accelerator control cable bracket bolt and bracket.
  4. Remove the MAP (1) sensor from the intake manifold.
  5. Inspect the MAP sensor grommet for wear or damage. If a problem is found, replace as necessary.