Scan Tool Data List
WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
Dash Integration Module (DIM) Scan Tool Data List
| Ignition ON, engine OFF. | |||
|---|---|---|---|
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
| Battery Voltage | Data | Volts | 12 |
Electronic Brake Control Module (EBCM) Scan Tool Data List
| Ignition ON, engine OFF, and steering wheel straight. | |||
|---|---|---|---|
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
| 8 Digit GM Part Number | Controller Information 1 | Numeric | Varies |
| ABS Active | DRP/ABS/TCS Data | Yes/No | No |
| ABS Failed | DRP/ABS/TCS Data | Yes/No | No |
| ABS Reference Speed |
|
km/h or mph | 0 |
| ABS Warning Indicator | DRP/ABS/TCS Data | On/Off | Off |
| Brake Temp Status | DRP/ABS/TCS Data | Normal/Over Temp | Normal |
| Calibration ID | Controller Information 1 | Numeric | Varies |
| DE Base Part Number | Controller Information 2 | Numeric | Varies |
| DE Build Sequence Number | Controller Information 1 | Numeric | Varies |
| DE Calibration Part Number | Controller Information 2 | Numeric | Varies |
| DE End Model Part Number | Controller Information 2 | Numeric | Varies |
| DE ROM Part Number | Controller Information 2 | Numeric | Varies |
| Delivered Torque PWM Duty Cycle | DRP/ABS/TCS Data | % | 10 |
| DRP Active | DRP/ABS/TCS Data | Yes/No | No |
| DRP Disabled | DRP/ABS/TCS Data | Yes/No | No |
| Dual Analog SWPS Input A |
|
Volts | Varies 0-5 |
| Dual Analog SWPS Input B |
|
Volts | Varies 0-5 |
| Extended Travel Brake Switch | DRP/ABS/TCS Data | Applied/Released | Released |
| Ignition Voltage | DRP/ABS/TCS Data | Volts | 12 |
| Julian Date Code | Controller Information 1 | Numeric | Varies |
| Lateral Accelerometer Input |
|
Volts | 2.5 |
| Lateral Accelerometer - Engineering Units |
|
g | 0 |
| Left Front Normal Force | VSES/CVRSS Data | % High | 80 |
| LF Rotor Temperature | DRP/ABS/TCS Data | °C/°F | 24°C (75°F) |
| LF Wheel Speed |
|
km/h or mph | 0 |
| LR Wheel Speed |
|
km/h or mph | 0 |
| Manufacturing Shift Info. | Controller Information 1 | Numeric | Varies |
| Manufacturing Site | Controller Information 1 | Alpha | Varies |
| PROM ID | Controller Information 1 | Numeric | Varies |
| Pump Motor Feedback Voltage | DRP/ABS/TCS Data | Volts | 12 |
| Pump Motor Relay Commanded State | DRP/ABS/TCS Data | On/Off | Off |
| Pump Motor Relay Feedback State | DRP/ABS/TCS Data | On/Off | Off |
| Red Brake Warning Indicator | DRP/ABS/TCS Data | On/Off | Off |
| Requested Torque PWM Duty Cycle | DRP/ABS/TCS Data | % | 90 |
| RF Rotor Temperature | DRP/ABS/TCS Data | °C/°F | 24°C (75°F) |
| RF Wheel Speed |
|
km/h or mph | 0 |
| Right Front Normal Force | VSES/CVRSS Data | % High | 80 |
| Rough Road Parameter | DRP/ABS/TCS Data | g | 0 |
| RR Wheel Speed |
|
km/h or mph | 0 |
| Solenoid Relay Commanded State | DRP/ABS/TCS Data | On/Off | On |
| Solenoid Relay Feedback State | DRP/ABS/TCS Data | On/Off | On |
| Steering Sensor Output to CVRSS | VSES/CVRSS Data | % | 2 |
| Steering Wheel Angle |
|
° | 0 |
| Stop Lamp Switch | DRP/ABS/TCS Data | Applied/Released | Released |
| Switched System Battery Voltage | DRP/ABS/TCS Data | Volts | 12 |
| TCS Active | DRP/ABS/TCS Data | Yes/No | No |
| TCS Active Indicator/Message | DRP/ABS/TCS Data | On/Off | Off |
| TCS Failed | DRP/ABS/TCS Data | Yes/No | No |
| TCS Warning Indicator/Message | DRP/ABS/TCS Data | On/Off | Off |
| Vehicle Yaw Rate - Engineering Units |
|
°/sec | 0 |
| VSES Active |
|
Yes/No | No |
| VSES Active Indicator/Message |
|
On/Off | Off |
| VSES Failed |
|
Yes/No | No |
| VSES Failed Indicator/Message |
|
On/Off | Off |
| VSES Is Centered |
|
Yes/No | No |
| Yaw Rate Sensor Input |
|
Volts | 2.5 |
HVAC Control Module (Instrument Panel Module) Scan Tool Data List
| Ignition ON, engine OFF. | |||
|---|---|---|---|
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
| TCS Switch | Non-HVAC Data | Off/On | Off |
Powertrain Control Module (PCM) Scan Tool Data List
| Ignition ON, engine OFF. | |||
|---|---|---|---|
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
| Traction Control Status | Engine Data 2 | Active/Inactive | Inactive |
| Torque Delivered Signal | Engine Data 2 | % | 10 |
| Torque Request Signal | Engine Data 2 | % | 90 |