LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> DeVille Protection Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 83 (Computer/Integrating Systems) >> Repair Instructions >> Dash Integration Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2005 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Right Closeout Panel
    GM713948Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors to the DIM.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws securing the DIM to the I/P.

    Tighten:  Tighten the screws to 2 N.m (80 lb in).

  3. Connect the closeout panel light electrical connector (1).
  4. Install the I/P closeout panel. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages, and Console.
  5. Program the module. Refer to Body Control Module (BCM) Programming/RPO Configuration (DIM)  or Body Control Module (BCM) Programming/RPO Configuration (RIM) .
scientia non olet · About LEMON Manuals