Installation Procedure

WARNING: This page is about a different car, the 2005 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Integration Module

Courtesy of GENERAL MOTORS CORP.

Install the RIM (1) to the electrical carrier.
Reinstall the push pin fasteners.
Reinstall the rear shelf. Refer to Shelf Carrier Replacement - Rear in Interior Trim.
Program the module. Refer to Body Control Module (BCM) Programming/RPO Configuration (DIM) or Body Control Module (BCM) Programming/RPO Configuration (RIM) .