LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> Escalade EXT >> Repair and Diagnosis >> Accessories & Equipment >> Memory Modules >> Adjustable Pedal System >> Repair Instructions >> Accelerator Pedal Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    IMPORTANT: Ensure that the brake pedal assembly is adjusted to its lowest position farthest from the drivers seat prior to removal of the accelerator assembly. Failure to do so could result in incorrect step-over height between the brake and accelerator pedals and improper function of the adjustable pedal system.
  1. Disconnect the adjustable pedals motor electrical connector.
  2. Remove the locking clip and disconnect the accelerator sensor connector.
  3. Remove the adjustable pedals cable from the accelerator pedal assembly using the following procedure:
    1. Twist the cable housing counterclockwise.
    2. Using needle nose pliers or an equivalent, compress the secondary locking tabs located below the twist and lock tabs and remove the cable from the accelerator assembly.
  4. Remove the accelerator mounting nuts from the accelerator bracket.
  5. Remove the accelerator assembly from the vehicle.
scientia non olet · About LEMON Manuals