LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Door System, Mirror System & Window System) >> Repair Instructions >> Module Replacement - Front Power Window >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the regulator to the door.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts to the window regulator.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

    3. Fig 1: Installing Window Regulator Bolts
    GM348453Courtesy of GENERAL MOTORS CORP.
  3. Align the window to the regulator and install the bolts holding the window to the regulator.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  4. Connect the wiring harness to the window motor assembly.
  5. Install the water deflector. Refer to Water Deflector Replacement - Front Door .
  6. Install the trim panel. Refer to Trim Panel Replacement - Side Front Door (With YE9 Early Production)  or Trim Panel Replacement - Side Front Door (With YE9 Late Production) .
  7. Lower the window. Inspect the window operation.
scientia non olet · About LEMON Manuals