Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Yukon XL, 2005 Chevrolet Suburban, and 2005 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of I/P Wiring Harness Electrical Connector & CPA Retainer

Courtesy of GENERAL MOTORS CORP.

Remove the connector position assurance (CPA) retainer (1).
Disconnect the instrument panel (I/P) wiring harness electrical connector (2).

Fig 2: View Of TAC Module Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the engine wiring harness electrical connector (1).

Fig 3: View Of Throttle Actuator Control (TAC) Module & Nuts

Courtesy of GENERAL MOTORS CORP.

Remove the throttle actuator control (TAC) module nuts.
Remove the TAC module.