LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> XLR V8-4.6L VIN A >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Ignition Control Module >> Service and Repair >> Ignition Module Replacement - Left
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Ignition Module Replacement - Left



IGNITION MODULE REPLACEMENT - LEFT

REMOVAL PROCEDURE




1. Remove the fuel injector sight shield.
2. Disconnect the ignition coil assembly electrical connector.




3. Remove the ignition coil assembly retaining bolts.
4. Carefully remove the ignition coil assembly.

INSTALLATION PROCEDURE




1. Install the ignition coil assembly.




2. Install the ignition coil assembly retaining bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the ignition coil assembly retaining bolts to 10 N.m (89 lb in).

3. Reconnect the ignition coil assembly electrical connector.
4. Install the fuel injector sight shield.
scientia non olet · About LEMON Manuals