Circuit/System Testing
WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the DRR antenna coax from the radio. Connect the EL-48028 to the radio and place on the roof of the vehicle. See Special Tools .
- Ignition ON, radio tuned to XM. Verify XM reception has improved.
- If the reception is not improved, replace the radio.
- Ignition OFF, disconnect the antenna coaxial from the digital radio antenna.
- Test for less than 5 ohms end to end at the coax center conductor.
- If greater than the specified range, replace the antenna coax.
- Test for less than 5 ohms end to end at the coax outer shield.
- If greater than the specified range, replace the antenna coax.
- Test for infinite resistance between the antenna coax center conductor and the outer shield.
- If less than the specified range, replace the antenna coax.
- If all circuits test normal, replace the digital radio antenna.
IMPORTANT:
Check for the proper operation of the OnStar® System prior to performing this diagnostic. Address any concerns with the OnStar® System prior to diagnosing or repairing the XM radio concern.