Installation Procedure

Fig 1: Removing Object Alarm Module (Yukon XL & Escalade ESV)

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the module (2).
Install the fasteners (1).
Tighten: Tighten the module fasteners (1) to 1.7 N.m (15 lb in).
Connect the electrical connector.
Install the left rear quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter - Left (Suburban) or Trim Panel Replacement - Rear Quarter - Left (Utility) in Interior Trim.