LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2006 >> Escalade EXT >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Transmission Support Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View Of Transmission Crossmember
    GM702036Courtesy of GENERAL MOTORS CORP.
  1. Install the transmission support to the frame (15 series).
    2. Fig 2: Identifying Crossmember & Bolts
    GM652595Courtesy of GENERAL MOTORS CORP.
  2. Install the transmission support to the frame (25/35 series).
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the bolts and the nuts in order to retain the transmission support to the frame.

    Tighten:  Tighten the nuts to 95 N.m (70 lb ft).

  4. Lower the rear of the transmission.
    5. Fig 3: Identifying Transmission Mount Nuts
    GM647997Courtesy of GENERAL MOTORS CORP.
  5. Install the transmission mount to the transmission support.
  6. Install the nuts in order to retain the transmission mount to the transmission support.

    Tighten:  Tighten the nuts to 40 N.m (30 lb ft).

  7. Remove the transmission jack.
  8. Lower the vehicle.
scientia non olet · About LEMON Manuals