Enable/Disable RVS
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
To disable the remote vehicle start (RVS) function, perform the following steps:
- Turn ON the ignition, with the engine OFF.
- Access the Remote Start personalization features within the driver information center (DIC).
- Enable or disable the Remote Start feature.
The current state of RVS can be viewed through the DIC display under the Remote Start the display will read either ON or OFF.
When valet mode is enabled by pressing the valet switch (if equipped), RVS operation will be disabled.