Circuit/System Verification
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Repair any brake system related symptoms and DTCs before performing this diagnostic.
Ignition ON, cruise on/off switch ON, rotate the steering wheel to both steering stops while activating each cruise control switch separately. With a scan tool, observe all cruise control switch parameters in the BCM. Verify that each cruise control switch activated and that each displayed switch position parameters match accordingly with each depressed switch, as the steering wheel is turned.