Circuit/System Testing
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the EBCM.
- Test for less than 2 ohm of resistance between the ground terminals 38 and 12 to ground.
- If greater than the specified range, test the ground circuits for an open/high resistance.
- Verify that a test lamp illuminates between the B+ terminals 25 and 13 and ground.
- If the test lamp does not illuminate, test the B+ circuits for a short to ground or an open/high resistance.
- If all circuits test normal, replace the EBCM.