Installation Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the automatic level control air dryer to the automatic level control air compressor.
- Push the air dryer/pressure sensor assembly in while rotating the air dryer/pressure sensor assembly counterclockwise until the assembly attaches to the automatic level control air compressor body.
- Install the air dryer/pressure sensor assembly retaining screw.
- Connect the electrical connector to the pressure sensor.
- Install the automatic level control air compressor to the vehicle. Refer to Air Compressor Replacement .