Hood Latch And Release Lever Removal/Installation: Notes

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

To remove the hood release cable, remove the following parts:
1. Battery.
2. Fresh-air duct (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [LF] .)
Remove in the order indicated in the figure.
Install in the reverse order of removal.
Adjust the hood. (See HOOD ADJUSTMENT .)

Fig 1: Removing/Installing Hood Latch And Release Lever With Torque Specifications
Courtesy of MAZDA MOTORS CORP.