LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2006 >> SRX 3.6 7, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Rear Body Control Module Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: View Of RIM
    GM1210870Courtesy of GENERAL MOTORS CORP.
  1. Install the module to the mounting bracket.
    2. Fig 2: View Of RIM Electrical Connectors
    GM1210878Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connectors (1).
  3. Install the right rear body side trim. Refer to Trim Panel Replacement - Body Side Rear (w/o TB5) or Trim Panel Replacement - Body Side Rear (w/TB5) .
  4. Reprogram the module. Refer to Control Module References .
scientia non olet · About LEMON Manuals