Scan Tool Data Definitions

Scan Tool Data Definitions

Remote Control Door Lock Receiver (RCDLR)

Battery Voltage
Display indicates battery voltage. Measured in volts.

Shift Lock Solenoid Command
The scan tool displays the commanded state of the solenoid when the brake pedal is applied or released the scan tool displays LOCK / UNLOCK

Shift Lock Solenoid State
The scan tool displays LOCK / UNLOCK the actual feedback state of the shift lock solenoid monitored by the RCDLR.

Transmission Control Module (TCM)

TCC Brake Switch
Displays ON or OFF status of the TCC Brake switch.

IMS A/B/C/P
Displays PARK / NEUTRAL / INVALID / REVERSE / DRIVE or LOW or HI for the state of each of the four inputs from the IMS. LOW displayed indicates a low voltage signal (0 volts) being monitored at the TCM. HI displayed indicates a high voltage signal (B+) being monitored at the TCM.