Entering the Driver Selection Sub-Menu

To enter the memory programming mode for your driver settings, use the following procedure:

1. Be sure the ignition is either on, in ACC position, or in RAP and place the transmission in PARK (P) or the vehicle speed is less than 6 mph (9 km/h).
2. Press any button on the appropriate keyless access transmitter to identify yourself as Driver 1 or Driver 2.
3. Turn on the radio by pressing the power/volume knob.
4. Press the CNFG radio button to enter the main menu of the radio.
5. Turn the tune/select knob and scroll to SETUP.
6. Press the tune/select knob to enter the SETUP menu.
7. Turn the tune/select knob and scroll to DRIVER SELECTION.
8. Press the tune/select knob to enter the DRIVER SELECTION sub-menu. The following items will appear:
   • DRIVER 1
   • DRIVER 2
   • RECALL DRIVER SETTINGS
   • STORE DRIVER SETTINGS

Refer to Keyless Entry System Description and Operation in Keyless Entry, Radio/Audio System Description and Operation in Entertainment and to Navigation System Description and Operation in Navigation Systems.