Circuit/System Testing
WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, X1 harness connector at the audio amplifier.
- Ignition ON, test for a varying AC voltage between the following signal circuit terminals listed below and ground when the OnStar® Call Center button is pressed.
- Audio Signal Circuit- terminal 3 (UX8)
- Audio Common Circuit- terminal 19 (UX8)
- Audio Signal Circuit- terminal 7 (UY5)
- Audio Common Circuit- terminal 23 (UY5)
- If AC voltage was not present, test the circuit for a short to voltage, short to ground, or an open/high resistance. If the circuit tests normal, replace the CIM.
- If all circuits test normal, replace the audio amplifier.