Personalization Commands

The following are personalization commands you can access through voice recognition by clearly stating the commands exactly as they are written. These functions are available to help with setting, storing, and recalling driver settings.

Set driver one, set driver two: These commands instruct the system to change the driver setting between driver 1 and driver 2. For more information, refer to Keyless Entry System Description and Operation in Keyless Entry.
Set driver exit: This command instructs the system to set/store an exit position for the driver that has been chosen. Adjust your seat and steering wheel exit position before stating this command.
Select driver one: This command selects the memory settings for driver 1. The seat, steering wheel and navigation system settings will change to those stored by driver 1.
Select driver two: This command selects the memory settings for driver 2. The seat, steering wheel and navigation system settings will change to those stored by driver 2.
Select driver exit: This command instructs the system to select the exit position for the currently chosen driver.
Driver help: This command instructs the system to assist with driver commands. Help commands will be displayed on the map screen when the vehicle is stopped.

Other voice commands available for the navigation system are as follows:

DVD Changer Commands
Phone Commands
OnStar Commands
Window Commands
Climate Control Commands
CD Commands
Radio Commands
Guidance Commands
Nametag Commands
Destination Commands
Point of Interest (POI) Commands
Map Commands
General Navigation Commands

For a complete list and description of all the voice commands available for the navigation system, refer to the Owner's Manual. The Owner's Manual will show you how to access and use voice recognition.