Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Digital Radio Receiver Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Connect the receiver electrical connectors.

Fig 2: View Of Digital Radio Receiver

Courtesy of GENERAL MOTORS CORP.

Locate the receiver to the vehicle.

NOTE: Refer to Fastener Notice .

Install the fasteners securing the receiver to the vehicle.
Tighten: Tighten the fasteners to 9 N.m (80 lb in).
Install the right body side trim. Refer to Body Side Rear Trim Panel Replacement (w/o TB5) or Body Side Rear Trim Panel Replacement (w/TB5) .
Perform the setup procedure for the digital radio receiver. Refer to Digital Radio Receiver Setup .