Disc Brake Component Specifications

WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Application	Specification
Application	Metric	English
Front Brake Pads
Taper	0.15 mm	0.006 in
Front Brake Rotors
Rotor Diameter	323.0 mm	12.7 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Minimum Thickness*	30.7 mm	1.209 in
Rotor Thickness (New)	32.20 mm	1.267 in
Rear Brake Pads
Taper	0.15 mm	0.006 in
Rear Brake Rotors
Rotor Diameter	320.0 mm	12.6 in
Rotor Maximum Allowable Assembled Lateral Runout	0.06 mm	0.002 in
Rotor Maximum Allowable Scoring	1.50 mm	0.059 in
Rotor Maximum Allowable Thickness Variation	0.025 mm	0.001 in
Rotor Minimum Thickness*	24.0 mm	0.94 in
Rotor Thickness New	26.0 mm	1.02 in
* All brake rotors have a minimum thickness dimension cast into them. Replace any rotor that is worn or machined below specification.