Radio Antenna Module Replacement (Sedan)

WARNING: This page is about a different car, the 2013 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radio Antenna Module & Bolt (Sedan)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Lower the rear of the headliner trim panel to access the antenna amplifiers. Refer to Headlining Trim Panel Replacement (Coupe) , Headlining Trim Panel Replacement (Sedan) , Headlining Trim Panel Replacement (Wagon) .
1	Radio Antenna Module Bolt (Qty: 1) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Radio Antenna Module Assembly Procedure Disconnect the electrical connections. Disconnect the antenna cables from the rear glass.

Callout

Component Name

Preliminary Procedure
Lower the rear of the headliner trim panel to access the antenna amplifiers. Refer to Headlining Trim Panel Replacement (Coupe) , Headlining Trim Panel Replacement (Sedan) , Headlining Trim Panel Replacement (Wagon) .

Radio Antenna Module Bolt (Qty: 1)

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

Radio Antenna Module Assembly

Procedure

Disconnect the electrical connections.
Disconnect the antenna cables from the rear glass.