Circuit/System Verification
- Engine running, command the supercharger vacuum bypass valve control (SCB) solenoid, duty cycle from 0 percent to 90 percent in 10 percent increments with a scan tool. Listen and feel for a clicking at the supercharger SCB solenoid.
- Engine running, observe the scan tool SCB Solenoid Circuit Status parameter. The reading should change from incomplete to OK when commanding the SCB solenoid.
- Engine running, observe the DTC information with a scan tool. DTC P0033 should not set.
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.