Circuit/System Verification
- Monitor the ABS DTCs on the scan tool.
- Engine running, observe the DTC information with a scan tool. DTCs P1380 or P1381 should not set.
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame Records data.
- Engine running, observe the DTC information with a scan tool. DTCs P1380 or P1381 should not set.
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.