Circuit/System Verification
IMPORTANT:
If DTC P0641 or P0651 are set, diagnose those DTCs first. Refer to DTC P0641 or P0651 .
- Ignition ON, observe the BARO parameter with a scan tool.
- Compare the BARO value to the range specified in the altitude vs. barometric pressure table.
- The BARO parameter should be within the range specified in the altitude vs. barometric pressure table. Refer to Altitude Versus Barometric Pressure .
- Engine running, observe the DTC information with a scan tool. DTCs P2228 or P2229 should not set.
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.