Installation Procedure
WARNING: This page is about a different car, the 2007 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Install the TV module (1) to the rear shelf.
- Install the fasteners securing the TV module to the rear shelf.
Tighten: Tighten the fasteners to 9 N.m (80 lb in).
- Connect the coax cables (3) to the TV module.
- Connect the electrical connector (1).
- Reinstall the rear shelf. Refer to Trim Panel Replacement - Rear Window Shelf .
NOTE:
Refer to Fastener Notice
.