LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Body Control Module (BCM) Programming/RPO Configuration >> Program VIN >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Program VIN: Notes

IMPORTANT: Always perform this procedure after BCM replacement.

Follow the instructions on the scan tool under Vehicle Control Systems>Module Replacement/Setup Procedures>BCM>Program VIN to perform this procedure.

IMPORTANT: After programming, perform the following to avoid future misdiagnosis:
  1. Turn the ignition OFF for 10 seconds.
  2. Connect the scan tool to the data link connector.
  3. Turn the ignition ON with the engine OFF.
  4. Use the scan tool in order to retrieve history DTCs from all modules.
  5. Clear all history DTCs.
scientia non olet · About LEMON Manuals