Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Install the traction control switch (2) to the trim plate.

Fig 1: View Of Traction Control Switch & Mounting Screws

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the two traction control mounting screws (1).
Tighten: Tighten the two traction control mounting screws to 2 N.m (18 lb in).
Connect the traction control electrical connector.
Install the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement in Instrument Panel, Gages, and Console.