LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Body Control System) >> Repair Instructions >> Rear Integration Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the RIM to the mounting bracket.
    2. Fig 1: View Of RIM
    GM1210870Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connectors (1).
    3. Fig 2: View Of RIM Electrical Connectors
    GM1210878Courtesy of GENERAL MOTORS CORP.
  3. Install the right rear body side trim. Refer to Trim Panel Replacement - Body Side Rear in Interior Trim.
  4. Reprogram the module. Refer to Body Control Module (BCM) Programming/RPO Configuration (RIM)  or Body Control Module (BCM) Programming/RPO Configuration (DIM) .
scientia non olet · About LEMON Manuals