Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Connect the electrical connectors (1, 2)

Fig 1: View Of Navigation Data Processor Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Locate the processor the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the nuts (1) securing the processor to the vehicle.
Tighten: Tighten the nuts to 9 N.m (80 lb in).

Fig 2: Locating Navigation Data Processor Nuts

Courtesy of GENERAL MOTORS CORP.

Install the left rear body side trim panel. Refer to Trim Panel Replacement - Body Side Rear in Interior Trim.