Configurable Radio Display Keys w/U2R or U2S

The soft keys on either side of the display can be programmed for different functions. To program the soft keys, perform the following steps:

1. Press the TUNE/SEL knob.
2. Turn the TUNE/SEL knob until SETUP is displayed; press the knob to select.
3. Turn the TUNE/SEL knob until CONFIGURE DISPLAY KEYS is displayed; press the knob to select.
4. Turn the TUNE/SEL knob to select the key to be programmed; press the knob to select. The current assigned feature is displayed.
5. Turn the TUNE/SEL knob to select the feature that you would like to assign to the key; press the knob to select.