LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> CTS Base, 2.8 T, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 337 (Cellular System, Entertainment System, And Navigation System) >> Repair Instructions >> Radio Antenna Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Antenna Module Coaxial Lead & Electrical Lead
    GM1292919Courtesy of GENERAL MOTORS CORP.
  1. Open the rear compartment lid.
  2. Remove the antenna ground plate. Refer to Antenna Ground Plate Replacement .
  3. Disconnect the coaxial lead and the electrical lead to the antenna module.
  4. Remove the screw that retains the antenna module to the antenna ground plate.
  5. Fig 2: View Of Antenna Module, Coaxial Lead & Electrical Lead
    GM1292925Courtesy of GENERAL MOTORS CORP.
  6. Remove the antenna module from the vehicle.