Diagnostic Indicator Pattern 6
WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the rear object sensor control module.
- Ignition ON, test for 9.5 volts between the chime control circuit terminal 22 and ground.
- If less than the specified value, test the chime control circuit for a short to ground or an open/high resistance. If all circuits test normal, replace the BCM.
- If greater than the specified value, refer to Speaker Malfunction .