Headlamp Control Module Replacement (T84/T85)
WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
Headlamp Control Module Replacement
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
. Fastener Tightening Specifications:
Refer to Underhood Lamp Bulb Replacement .Preliminary Procedure: Remove the right front wheelhouse liner in order to access the headlamp control module. Refer to Wheelhouse Filler Replacement
. |
|
| 1 | Headlamp Control Module Screws (Qty: 2) Tighten: 4 N.m (4 N.m (35 lb in) |
| 2 | Headlamp Control Module Forward Lamp Harness Connector Tip: Disengage the connector from the headlamp control module. |
| 3 | Headlamp Control Module Bracket Refer to Control Module References for programming and setup information. Tip: Remove the headlamp control module from the bracket. |