LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> CTS Base, 2.8 T, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Shift Lock Control System) >> Diagnostic Information and Procedures >> Scan Tool Data List
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Scan Tool Data List

WARNING: This page is about a different car, the 2006 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
Rear Integration Module

Scan Tool Parameter Data List Units Displayed Typical Data Value
Operating Conditions: Ignition ON, with the engine OFF. Transmission shift lever in the PARK position.
Ignition 0 Inputs ON/OFF ON
Ignition 1 Inputs ON/OFF ON
Brake to Shift Control Outputs ON/OFF ON
Transmission Control Module (TCM) or Powertrain Control Module (PCM)

Scan Tool Parameter Data List Units Displayed Typical Data Value
Operating Conditions: Ignition ON, with the engine OFF. Transmission shift lever in the PARK position.
Ignition Voltage Transmission Data Volts 0-25v
IMS A/B/C/P Transmission Data Park, Park/Reverse, Reverse, Reverse/Neutral, Neutral, Neutral/Drive 4, Drive 4, Drive 4/Drive 3, Drive 3, Drive 3/Drive 2, Drive 2, Drive 2/Drive 1, Drive 1, Invalid, Open Park
TCC Brake Switch Transmission Data ON/OFF OFF