Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.

Position the amplifier to the electrical multi-use bracket and connect the electrical leads to the amplifier.
Install the amplifier to the bracket.

Fig 1: View Of Electrical Multi-Use Bracket

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the 4 amplifier retaining screws to the bracket.
Tighten: Tighten the screws to 2.5 N.m (22 lb in).
Install the cover to the I/P electrical center.
Refer to Control Module References for programming and setup information.