LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> CTS Base, 3.6 7, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 332 (Cellular System, Entertainment System, And Navigation System) >> Repair Instructions >> Cellular and Navigation Antenna Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the antenna assembly to the windshield and connect the coaxial leads to the antenna.
  2. Route the antenna coaxial cable to the windshield header.
    3. Fig 1: View Of Antenna Assembly & Coaxial Cable
    GM1222567Courtesy of GENERAL MOTORS CORP.
  3. Align the antenna assembly to the windshield bracket retaining clips. Push the assembly to the driver side of the vehicle to engage the retainers.
  4. Install the windshield garnish molding. Refer to Windshield Garnish Molding Replacement .
scientia non olet · About LEMON Manuals