Setting Options
Select Set Options under the DIM special functions menu, and follow the Tech 2 on-screen instructions. The following options need to be set, when the RIM is replaced. All listed options are for export only, and the selection should be No for domestic vehicles.
- Intrusion Sensor Part A
- Intrusion Sensor Part B
- Inclination Sensor Part A
- Inclination Sensor Part B
- Alarm Siren Module Part A
- Alarm Siren Module Part B
IMPORTANT:
After programming, perform the following to avoid future misdiagnosis:
- Turn the ignition OFF for 10 seconds.
- Connect the scan tool to the data link connector.
- Turn the ignition ON, with the engine OFF.
- Use the scan tool in order to retrieve history DTCs from all modules.
- Clear all history DTCs.