Steering Column Module (SCM)
- Column Downward Softstop Pos.:
-
Displays the tilt downward softstop position in volts or counts.
- Column Forward Softstop Pos.:
-
Displays the telescope forward softstop position in volts or counts.
- Column Rearward Softstop Pos.:
-
Displays the telescope rearward softstop position in volts or counts.
- Column Softstop Learn Status:
-
Displays Learned if the softstops are learned, and Unlearned if the softstops have not been learned.
- Column Upward Softstop Pos.:
-
Displays the tilt upward softstop position in volts or counts.
- Key Capture Solenoid Cmd.:
-
Displays On when the BCM energizes the ignition lock solenoid.
- Memory 1 Telescope Position:
-
Displays the telescope memory position for driver 1.
- Memory 1 Tilt Position:
-
Displays the tilt memory position for driver 1.
- Memory 2 Telescope Position:
-
Displays the telescope memory position for driver 2.
- Memory 2 Tilt Position:
-
Displays the tilt memory position for driver 2.
- SWC Bank 1 Status
-
Indicates the switch pressed SW1-SW7, and Idle when released.
- Telescope Forward Command:
-
Displays Active when the DPM energizes the telescope actuator to move forward.
- Telescope Forward Switch:
-
Displays Active when the telescope forward switch is closed.
- Telescope Rearward Command:
-
Displays Active when the DPM energizes the telescope actuator to move rearward.
- Telescope Rearward Switch:
-
Displays Active when the telescope rearward switch is closed.
- Telescope Sensor:
-
Displays the forward/rearward position of the steering column in volts or counts.
- Tilt Down Command:
-
Displays Active when the DPM energizes the tilt actuator to move down.
- Tilt Down Switch:
-
Displays Active when the tilt down switch is closed.
- Tilt Sensor:
-
Displays the upward/downward position of the steering column in volts or counts.
- Tilt Up Command:
-
Displays Active when the DPM energizes the tilt actuator to move up.
- Tilt Up Switch:
-
Displays Active when the tilt up switch is closed.