Rear Object Alarm Detection System

When the ignition is ON and the vehicle is placed into reverse, the object detection system performs a bulb check. During the bulb check, the 3 indicators on the rear information center telltale assembly display will illuminate for approximately 2 seconds to indicate that the system is working. The object detection system performs a bulb check and operates when the following conditions are present:

• The ignition is ON.
• The vehicle is placed in REVERSE (R) for rear parking aid.
• The vehicle speed is less than 8 km/h (5 mph).

  At speeds greater than 8 km/h (5 mph), the object detection system is disable. The red indicator flashes to warn the driver that the object detection system is disabled.