LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> DTS 4.6 9 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 4.6L - Introduction (2 Of 2) >> Repair Instructions >> Exhaust Gas Recirculation Pipe Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying EGR Valve Inlet Pipe
    GM1666841Courtesy of GENERAL MOTORS CORP.
  1. Position the EGR valve pipe to the exhaust manifold.
    2. NOTE: Refer to Fastener Notice .
  2. Tighten the EGR pipe nut at the exhaust manifold.

    Tighten:  Tighten the nut to 60 N.m (44 lb ft).

  3. Lower the vehicle.
  4. Install the EGR valve pipe bolt at the water pump housing.

    Tighten:  Tighten the bolt to 28 N.m (21 lb ft).

scientia non olet · About LEMON Manuals