LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> DTS 4.6 9 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 4.6L - Introduction (2 Of 2) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

CAUTION: Fuel Vapors can collect while servicing fuel system parts in enclosed areas such as a trunk. To reduce the risk of fire and increased exposure to vapors:
  • Use forced air ventilation such as a fan set outside of the trunk.
  • Plug or cap any fuel system openings in order to reduce fuel vapor formation.
  • Clean up any spilled fuel immediately.
  • Avoid sparks and any source of ignition.
  • Use signs to alert others in the work area that fuel system work is in process.
    Fig 1: View Of Fuel Pump Module
    GM1671973Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel pump module. Refer to Fuel Sender Assembly Replacement .
  2. Release the fuel level sensor electrical connector clip.
  3. Disconnect the fuel level sensor electrical connector (1) from under the fuel module cover.
  4. Release the locking tab (2) and slide the fuel level sensor (3) down off of the bucket.
scientia non olet · About LEMON Manuals