Scan Tool Data Definitions

The scan tool displays the part number of the module.

The scan tool displays 0-16 volts. The level of battery voltage at the module.

The scan tool displays a 4 digit number. This number designates the calibration or program level used in the PROM.

The scan tool displays 0-127.5 amps. The current measured during adjustable pedals or seat operation.

The scan tool displays a 4 digit number representing the level of hardware incorporated into the module.

The scan tool displays a 3 digit number. This number is the day of the year that the module was built.

The scan tool displays a 4 digit number. This is the identification number of the PROM that is incorporated into the module.

The scan tool displays 0-5.0 volts or 0-255 A/D. The sensor potentiometer provides an analog voltage which varies directly with the adjustable pedals position. High scan tool values (volts or A/D) indicate that the pedals are in the froward position and low values indicate that the pedals are in the rearward position.

The scan tool displays Inactive/Active. When the adjustable pedals forward switch is activated, the scan tool will momentarily display switch input to the driver position module as Active.

The scan tool displays Inactive/Active. When the adjustable pedals forward switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the driver position module is commanding the adjustable pedals motor in the forward direction.

The scan tool displays Inactive/Active. When the adjustable pedals rearward switch is activated, the scan tool will momentarily display the switch input to the driver position module as Active.

The scan tool displays Inactive/Active. When the adjustable pedals rearward switch is activated or when a memory recall occurs, the scan tool will momentarily display Active while the output from the driver position module is commanding the adjustable pedals motor in the rearward direction.

The scan tool displays the 4 digit number of the software incorporated into the module.

The scan tool displays a 4 digit number. This number represents the year the module was built.