Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Receiver Fasteners & Receiver

Courtesy of GENERAL MOTORS CORP.

Install the receiver to the vehicle.

NOTE: Refer to Fastener Notice .

Install the receiver fasteners.
Tighten: Tighten the fasteners to 3 N.m (26 lb in).
Connect the electrical connector.
Install the rear seat. Refer to Rear Seat Replacement .
Perform the setup procedure for the digital radio receiver. Refer to Control Module References for programming and setup information.