Steering Wheel Control Switch Assembly Replacement
Courtesy of GENERAL MOTORS CORP. Steering Wheel Control Switch Assembly Replacement
| Callout |
Component Name |
|
Preliminary Procedure
- Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling
.
- Remove the steering wheel. Refer to Steering Wheel Replacement
.
- Remove the horn switch. Refer to Horn Switch Replacement
.
|
| 1 |
Steering Wheel Trim Cover (Qty: 2)
Tip:
Remove the 4 horn contact screws. |
| 2 |
Steering Wheel Control Switch Assembly Screw (Qty: 4)
Tip:
- Quantity may vary with vehicle options.
- DO NOT over tighten the steering wheel control switch screws or damage to the switch(s) or steering wheel covers may occur.
|
| 3 |
Steering Wheel Control Switch Assembly (Qty: 2)
Tip:
- Quantity may vary with vehicle options.
- Make sure the steering wheel control switch(s) are properly seated to the steering wheel shroud during installation.
|