LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC B1517 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. If the DTC is history, refer to Charging System Test .
  2. If the DTC is current, turn ON the ignition, and with a DMM, measure the voltage between the battery positive voltage circuits of the BCM and the ground circuits of the BCM.
    • If the voltage is within 9.5-15 volts, replace the BCM.
    • If the voltage is not within 9.5-15 volts, measure the voltage between the battery positive voltage circuits of the BCM and a separate ground.
    • If the voltage is within 9.5-15 volts, test the battery positive and ground circuits of the BCM for high resistance or an open, and repair as necessary.
    • If the voltage differs by more than 2 volts, repair the circuit as necessary.
scientia non olet · About LEMON Manuals