Circuit/System Verification
WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Perform the steering angle sensor calibration.
- Clear the DTC with a scan tool, and operate the vehicle within the conditions for setting the DTC.
- Verify DTCs : C0186, C0196, C0252, C0253, or C0710 are not set.
- If DTCs C0186, C0196, C0253, or C0710 are set, refer to Diagnostic Trouble Code (DTC) List - Vehicle
- If only DTC C0252 set as current, replace the EBCM.